Hard access to the switch Tim?
Post your winter tractor setups
-
- Posts: 5247
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12680 times
- Been thanked: 16763 times
- Contact:
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5280 times
- Been thanked: 5063 times
Re: Post your winter tractor setups
I haven't even looked in there yet. It might not be that bad, I just hate that electric stuff.
I don't have a heated place to work on it at home, should probably bring it in to my shop and make some time to work on it while I'm hiding from the cold.
Probably should get it fixed before it snows and I need it, and jiggling the lever doesn't work.
deck's on, blades sharp, let's go it's time to mow
- MattA
- Posts: 1006
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 3 times
- Been thanked: 4389 times
Re: Post your winter tractor setups
Tim - If you get stuck and your starter won't crank due to the various interlock switches, turn your ignition switch to the run position, connect an automotive jumper cable to the batteries positive terminal and touch the other end of the jumper cable to your starters positive input connection. Expect a decent spark as the starter starts to crank. Essentially your bypassing the interlock system that controls the starter solenoid and also bypassing the starter solenoid. Wouldn't hurt to thread a nut over the starters positive input stud so that you don't melt the threads. I don't have an Onan but if you have access to the starter solenoid, you could also manually trigger the solenoid (I "think" applying +12V to the solenoid should activate it).
I know it sounds kind of rough but we used it as kids to start our 1990's craftsman (MTD at that point?) tractor (12HP Briggs) until we could get the solenoid replaced.
I know it sounds kind of rough but we used it as kids to start our 1990's craftsman (MTD at that point?) tractor (12HP Briggs) until we could get the solenoid replaced.
Ingersoll 4016
- Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Post your winter tractor setups
Tim,
Are you getting a click at the starter but no spin? If so read this thread. It started with the click no spin and moved up to how JD's Onan's suffered from a voltage drop from all of the many safety's, and fixed it by installing a relay to supply adequate power to the solenoid.
https://www.casecoltingersoll.com/threa ... ion.69338/
Gordy
Are you getting a click at the starter but no spin? If so read this thread. It started with the click no spin and moved up to how JD's Onan's suffered from a voltage drop from all of the many safety's, and fixed it by installing a relay to supply adequate power to the solenoid.
https://www.casecoltingersoll.com/threa ... ion.69338/
Gordy
- Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Post your winter tractor setups
There is a less sparky/violent way to do that on tractors with the 4 terminaled solenoids. There are 2 small terminals, one is power from the ignition switch. The other is ground threw the safety switches, simply put a small jumper on that terminal to ground. Please remember this should only be a test or emergency procedure.MattA wrote: ↑Wed Jan 26, 2022 10:35 pm Tim - If you get stuck and your starter won't crank due to the various interlock switches, turn your ignition switch to the run position, connect an automotive jumper cable to the batteries positive terminal and touch the other end of the jumper cable to your starters positive input connection. Expect a decent spark as the starter starts to crank. Essentially your bypassing the interlock system that controls the starter solenoid and also bypassing the starter solenoid. Wouldn't hurt to thread a nut over the starters positive input stud so that you don't melt the threads. I don't have an Onan but if you have access to the starter solenoid, you could also manually trigger the solenoid (I "think" applying +12V to the solenoid should activate it).
I know it sounds kind of rough but we used it as kids to start our 1990's craftsman (MTD at that point?) tractor (12HP Briggs) until we could get the solenoid replaced.
Gordy
- MattA
- Posts: 1006
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 3 times
- Been thanked: 4389 times
Re: Post your winter tractor setups
Shot some pictures of my finished weight setup while getting ready for the storm today. Looks much better with the painted weights. The weights are separated by a stack of oversized flat washers. At some point I'd like to get some hairpin cotter pins to hold the setup together.
Ingersoll 4016
-
- Posts: 5247
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12680 times
- Been thanked: 16763 times
- Contact:
- propane1
- Posts: 2577
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6090 times
- Been thanked: 9473 times
- MattA
- Posts: 1006
- Joined: Sun Mar 07, 2021 1:57 pm
- Location: Swansea MA
- Has thanked: 3 times
- Been thanked: 4389 times
Re: Post your winter tractor setups
Thought I used to have a snow blowing thread for posting videos but I couldn't find it. This works...
Case 446 with Onan 20HP XSL
Case 446 with Onan 20HP XSL
Ingersoll 4016
- thebuildist
- Posts: 844
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 860 times
- Been thanked: 3416 times
Re: Post your winter tractor setups
You guys are SO LUCKY. We never get snow here. Maybe 1/2" of slush every other year, gone by the afternoon. And a full on ice storm, where there's an inch of pure ice on all the surfaces. With no salt, the roads are impassable, and all the tree limbs fall down due to the weight, which knock down all the power lines and the power's out for a week.
BUT OTHER THAN THAT, no winter weather at all. Darkness and rain and humid cold.
So I don't have a snowcaster. Or a cab. Or any winter related need for a blade.
It's just a sad, sad tale.
I hope you folks at least feel a little guilty when you think of all the things I don't get to experience. No losing feeling in my fingers or toes. No chapped face. No burning tingle when the feeling comes back. No slipping on the ice. No rusted out fender wells. No driving in whiteout conditions. None of that for me.
You guys are SO LUCKY.
Bob
BUT OTHER THAN THAT, no winter weather at all. Darkness and rain and humid cold.
So I don't have a snowcaster. Or a cab. Or any winter related need for a blade.
It's just a sad, sad tale.
I hope you folks at least feel a little guilty when you think of all the things I don't get to experience. No losing feeling in my fingers or toes. No chapped face. No burning tingle when the feeling comes back. No slipping on the ice. No rusted out fender wells. No driving in whiteout conditions. None of that for me.
You guys are SO LUCKY.
Bob
"Never be afraid to try something new. How hard can it be?"