I'm about to give you some unsolicited advice. I know you didn't ask for it, and you think you don't want it, but hear me out.
Because I'm a really clever guy.
I'm so clever that I built my own loader complete with forks and a lifting boom and a rollover protection bar.
So clever that I welded and built my own play fort from pallet rack teardrop beams, complete with a 3 swings for the grandkids.
So you can take it from me: If you find yourself mowing around this swingset, using this loader mower, and you think it's might be a good idea to mow straight through here:
DON'T DO IT. It's a trap. The swing is evil, and it intends to grab onto your ROPS as you go through, and the next thing you'll know, your ROPS' head protection will be put to the test.
That's my advice: Don't drive your ROPS equipped machine through and under a swingset bar.
Clever, huh?
Unsolicited advice
- thebuildist
- Posts: 824
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 850 times
- Been thanked: 3304 times
- thebuildist
- Posts: 824
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 850 times
- Been thanked: 3304 times
Re: Unsolicited advice
But if you DO drive through there, here's how to proceed:
1. Remove the bolts connecting the swingset crossmember and pull it back out of the way. 2. Drive the tractor out from the pile and install the forks. You're about to need them.
3. Back up your new-to-you Toyota pickup, and get your winch out from under the rear seat. 4. Hook the winch into your Tundra's rear hitch receiver,
a. and hook the winch line onto the nearest swingfort platform frame member.
b. Grab your wireless winch controller
c. And drive the tractor around where you can get one fork tine underneath the swingfort frame 5. Gingerly lift up on the frame with the fork, while gingerly pushing the feed in" button on the wireless winch controller.
If you just apply winch while the swingfort is laying completely on its side, it will just slide across the yard toward the truck.
6. Once you have the frame tilted up 3 or 4 feet high, and a taut winch line, then the winch can take over the tilting, and you can hop off the tractor.
7. Go around to the other side near the winch line so you can see what's happening. Winch in just to the point that you can see the fort teetering for balance. Then get under the fort's crossmember, ready to "catch" it. Give it a tug toward you past its tipping point, and do your best to give it a controlled landing back on all fours.
8. You don't stand a chance of it being SUPER gentle. But you can and should prevent it from tumbling forward onto its other side.
8a: And onto your shiny truck. DON'T let it fall on your shiny truck. 9. Lastly, use your pallet forks to lift up one side of the swingfort platform at a time, so you can manhandle it back onto its concrete pads. You may now resume mowing.
Bob
1. Remove the bolts connecting the swingset crossmember and pull it back out of the way. 2. Drive the tractor out from the pile and install the forks. You're about to need them.
3. Back up your new-to-you Toyota pickup, and get your winch out from under the rear seat. 4. Hook the winch into your Tundra's rear hitch receiver,
a. and hook the winch line onto the nearest swingfort platform frame member.
b. Grab your wireless winch controller
c. And drive the tractor around where you can get one fork tine underneath the swingfort frame 5. Gingerly lift up on the frame with the fork, while gingerly pushing the feed in" button on the wireless winch controller.
If you just apply winch while the swingfort is laying completely on its side, it will just slide across the yard toward the truck.
6. Once you have the frame tilted up 3 or 4 feet high, and a taut winch line, then the winch can take over the tilting, and you can hop off the tractor.
7. Go around to the other side near the winch line so you can see what's happening. Winch in just to the point that you can see the fort teetering for balance. Then get under the fort's crossmember, ready to "catch" it. Give it a tug toward you past its tipping point, and do your best to give it a controlled landing back on all fours.
8. You don't stand a chance of it being SUPER gentle. But you can and should prevent it from tumbling forward onto its other side.
8a: And onto your shiny truck. DON'T let it fall on your shiny truck. 9. Lastly, use your pallet forks to lift up one side of the swingfort platform at a time, so you can manhandle it back onto its concrete pads. You may now resume mowing.
Bob
"Never be afraid to try something new. How hard can it be?"
-
- Posts: 1617
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12373 times
- Been thanked: 7080 times
Re: Unsolicited advice
Well this is why we can’t have nice things!
Seriously though im thankful no one got hurt. At least since you were the builder, you could reassemble it with out much trouble.
I do appreciate the advice, but unfortunately it’s a little late for me. I’ve already gotten myself tangled up in swing sets a couple times! Luckily for me though I’ve never turned one over!
Here’s a picture of the air cleaner cap on my Cub. It was in perfect shape and on the tractor for 77 years until I tangle with a swing set! It came off and I ran it over So on some level I feel your pain!
Seriously though im thankful no one got hurt. At least since you were the builder, you could reassemble it with out much trouble.
I do appreciate the advice, but unfortunately it’s a little late for me. I’ve already gotten myself tangled up in swing sets a couple times! Luckily for me though I’ve never turned one over!
Here’s a picture of the air cleaner cap on my Cub. It was in perfect shape and on the tractor for 77 years until I tangle with a swing set! It came off and I ran it over So on some level I feel your pain!
- Harry
- Posts: 1553
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9645 times
- Been thanked: 6554 times
Re: Unsolicited advice
I hope no one was hurt Bob. Maybe some of your pride I guess. If it happened to me I probably wouldn’t tell a soul Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
- RoamingGnome
- Posts: 658
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 9302 times
- Been thanked: 3356 times
Re: Unsolicited advice
That was a good incident report Bob - Health and Safety would be impressed
Glad no one was hurt, and kudos to you for building one heck of a sturdy play fort that could survive a tumble like that
Glad no one was hurt, and kudos to you for building one heck of a sturdy play fort that could survive a tumble like that
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
- DavidBarkey
- Posts: 3187
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17527 times
- Been thanked: 10829 times
Re: Unsolicited advice
Oh no Bob , Glad you were able to fix it all up and not to much damage or injuries. Even the the smartest among us have those "what was I thinking moments in life " I know I sure have learned a lot of thing "The Hard Way" .
Dave
Mad Tractor Builder
Mad Tractor Builder
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5258 times
- Been thanked: 5062 times
Re: Unsolicited advice
oh man happens just when things are going smoothly and you think you can get done and take a break. hopefully the grandchildren don't beat you up too bad
deck's on, blades sharp, let's go it's time to mow