Page 35 of 87

Re: The weather

Posted: Fri Mar 03, 2023 10:16 am
by JSinMO
propane1 wrote: Fri Mar 03, 2023 7:57 am But really can’t complain about the snow. We didn’t get any major amounts this winter.
Noel
Same situation down here this year. Never got more than a couple inches, not that I’m complaining! We could still get a big snow this month but it won’t stick around.

Re: The weather

Posted: Fri Mar 03, 2023 10:37 am
by propane1
JSinMO wrote: Fri Mar 03, 2023 10:16 am
propane1 wrote: Fri Mar 03, 2023 7:57 am But really can’t complain about the snow. We didn’t get any major amounts this winter.
Noel
Same situation down here this year. Never got more than a couple inches, not that I’m complaining! We could still get a big snow this month but it won’t stick around.

Same here Jeff. March and April can be nasty here too.

So I went out and cleaned up the snow. The sun had started to melt the stuff off the vehicles. Got stuck on the ice a few times with the John Deere. No chains on this one. So the split rear brakes got me out of those jams. They work great.

Noel

Re: The weather

Posted: Fri Mar 03, 2023 11:04 am
by Eugen
Hope the snow stays away for another day at least.

My neighbour asked me to help with clearing up a packed snow area two days ago, the 444 was doing great pushing through some ice and packed snow, when all of a sudden I see the auger chain swirling through the air in front of the tractor. New chain I put months ago. :headbash: Need to put the chain back on.. I know, easy task, but I need to make time for it too. :violin:

Re: The weather

Posted: Fri Mar 03, 2023 11:57 am
by DavidBarkey
Eugen wrote: Fri Mar 03, 2023 11:04 am Hope the snow stays away for another day at least.

My neighbour asked me to help with clearing up a packed snow area two days ago, the 444 was doing great pushing through some ice and packed snow, when all of a sudden I see the auger chain swirling through the air in front of the tractor. New chain I put months ago. :headbash: Need to put the chain back on.. I know, easy task, but I need to make time for it too. :violin:
Did the link come apart ?

Re: The weather

Posted: Fri Mar 03, 2023 12:11 pm
by Eugen
DavidBarkey wrote: Fri Mar 03, 2023 11:57 am
Eugen wrote: Fri Mar 03, 2023 11:04 am Hope the snow stays away for another day at least.

My neighbour asked me to help with clearing up a packed snow area two days ago, the 444 was doing great pushing through some ice and packed snow, when all of a sudden I see the auger chain swirling through the air in front of the tractor. New chain I put months ago. :headbash: Need to put the chain back on.. I know, easy task, but I need to make time for it too. :violin:
Did the link come apart ?
I think so. Beats me as to why, I was pretty sure I put the clip on right, and it worked for at least a month too. :letmesee:

Re: The weather

Posted: Fri Mar 03, 2023 1:04 pm
by Gordy
Eugen wrote: Fri Mar 03, 2023 12:11 pm
DavidBarkey wrote: Fri Mar 03, 2023 11:57 am
Eugen wrote: Fri Mar 03, 2023 11:04 am Hope the snow stays away for another day at least.

My neighbour asked me to help with clearing up a packed snow area two days ago, the 444 was doing great pushing through some ice and packed snow, when all of a sudden I see the auger chain swirling through the air in front of the tractor. New chain I put months ago. :headbash: Need to put the chain back on.. I know, easy task, but I need to make time for it too. :violin:
Did the link come apart ?
I think so. Beats me as to why, I was pretty sure I put the clip on right, and it worked for at least a month too. :letmesee:
I have unknowingly run the master link clips backwards for long times. The only issue popped up when I got into the icy/hard chunky stuff. So with the master link at the top of the auger sprocket the rounded end of the clip needs to be facing forward. Sometimes I have had issues getting the split ends of the clip to fully seat into the groove on the pin.

:cheers:
Gordy

Re: The weather

Posted: Fri Mar 03, 2023 2:20 pm
by DavidBarkey
Eugen wrote: Fri Mar 03, 2023 12:11 pm
DavidBarkey wrote: Fri Mar 03, 2023 11:57 am
Eugen wrote: Fri Mar 03, 2023 11:04 am Hope the snow stays away for another day at least.

My neighbour asked me to help with clearing up a packed snow area two days ago, the 444 was doing great pushing through some ice and packed snow, when all of a sudden I see the auger chain swirling through the air in front of the tractor. New chain I put months ago. :headbash: Need to put the chain back on.. I know, easy task, but I need to make time for it too. :violin:
Did the link come apart ?
I think so. Beats me as to why, I was pretty sure I put the clip on right, and it worked for at least a month too. :letmesee:
I put the clip on the auger side . I know you would think the other side would be more protected , but found that that is where the junk builds up and knocks it off . Other than the bottom being the pull side . Only other thing is to get the cotter pin type , hard to find though .

Re: The weather

Posted: Fri Mar 03, 2023 2:56 pm
by Eugen
DavidBarkey wrote: Fri Mar 03, 2023 2:20 pm
I put the clip on the auger side . I know you would think the other side would be more protected , but found that that is where the junk builds up and knocks it off . Other than the bottom being the pull side . Only other thing is to get the cotter pin type , hard to find though .
sorry, I don't understand Dave, what side is which side and how clip clap clip :pullhair: :rofl: :geek:

Re: The weather

Posted: Fri Mar 03, 2023 3:31 pm
by DavidBarkey
Eugen wrote: Fri Mar 03, 2023 2:56 pm
DavidBarkey wrote: Fri Mar 03, 2023 2:20 pm
I put the clip on the auger side . I know you would think the other side would be more protected , but found that that is where the junk builds up and knocks it off . Other than the bottom being the pull side . Only other thing is to get the cotter pin type , hard to find though .
sorry, I don't understand Dave, what side is which side and how clip clap clip :pullhair: :rofl: :geek:
Awh :cuss: just weld it . :rofl: :rofl: :rofl:

Re: The weather

Posted: Fri Mar 03, 2023 3:48 pm
by Eugen
I was gonna say that! Weld the sucker shut! :smash: