Wood cuttin starting soon.

Shoot the breeze here.
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Wood cuttin starting soon.

Post by propane1 »

Hehe. Hopefully. I’ll start at the end where the saw bench is and work my way forward in the direction of the tractor. And that will be a start.

Noel :D
Attachments
9E866CAB-37E5-4AF6-A50A-E824401F96C5.jpeg
3B7938DA-0D49-4645-8071-DE1312238CB5.jpeg
CDEA242E-7D49-443D-A128-7D58F73144B1.jpeg
5CBCB268-D85D-4370-A749-8447C7534094.jpeg
32949C64-13F3-4B4A-A621-F6A541694269.jpeg
JSinMO United States of America
Posts: 1526
Joined: Sat Apr 23, 2022 8:16 pm
Location: Missouri
Has thanked: 11930 times
Been thanked: 6578 times

Re: Wood cuttin starting soon.

Post by JSinMO »

That is one heck of a pile of firewood. That would last me for years!
User avatar
Chad Canada
Posts: 332
Joined: Tue Mar 16, 2021 11:03 am
Location: Smithville
Been thanked: 940 times

Re: Wood cuttin starting soon.

Post by Chad »

Lots of work there Noel, take your time!

Sent from my Pixel 4a using Tapatalk

User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16195 times
Contact:

Re: Wood cuttin starting soon.

Post by Eugen »

Noel, you will have biceps like Arnold when you're done with that pile! :O
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Re: Wood cuttin starting soon.

Post by propane1 »

Naaa, then all the girls will be chasin me, I’m to old for that foolishness. :giggle: :giggle: :rofl: :rofl:

Any way, got a few things done today. Fixed a few things on the escalator, and oiled her up. Put the drive shaft on the tractor and saw bench. Greased up a bunch of stuff. Fill tractor with gas. Oil is good. Chopped down some vegetation. Did some weed whacking. Had tractor running and the saw bench. Cut up one softwood log. Still a couple of little things to do. Have to sharpen saw blade, made short work of the softwood today, so can’t be to bad. Need to get my exhaust pipe extension on yet. Exhaust pipe pointed right at where you stand to cut the wood. So I have a pipe to put on the exhaust pipe with a ninety bend, then straight up about 8’. Should be able to cut some wood tomorrow. :giggle:

Noel :D
Attachments
270D7607-F8EA-41D2-9953-B602C5FD4437.jpeg
71FC4F6F-192C-4535-8334-FEDA84803E37.jpeg
8402D508-A355-4A94-A8B9-DEF4041F639D.jpeg
3AC1111B-C39F-4D92-AFC2-6989CBDE1D61.jpeg
47169FD1-3388-4C84-8564-23C5C10CA9BA.jpeg
0BE2C3DF-C1F1-4381-838A-4AEECBB46251.jpeg
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Re: Wood cuttin starting soon.

Post by propane1 »

Few more things done. Exhaust stack on. Saw sharpened. More vegetation cut back. Few things throwen into the woods. Trailer under the escalator. Greased one more point on escalator. So ready to start. :giggle: :giggle: :giggle: :giggle:


Noel :D
Attachments
D3CF91C5-07E3-4D3B-989A-25DEBC2C5C6B.jpeg
EC473980-C657-4193-86D7-50C84802D9C8.jpeg
E5657CCC-BC0B-4269-9302-21B055F38C7F.jpeg
C5087238-74E4-4E7E-828D-C73579C2B8D9.jpeg
13FC635C-A5E0-4517-B3F4-E24215BB0839.jpeg
74F56107-82FB-42B0-A5A2-09C7006E25E7.jpeg
User avatar
Harry United States of America
Posts: 1487
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9168 times
Been thanked: 6201 times

Re: Wood cuttin starting soon.

Post by Harry »

I started to move firewood yesterday. I made seven bucket loads to the side of my shop where I stack it and easy access for winter burning. I'm just getting started and it will be many more loads before I'm ready for winter. The 1/4-yard bucket doesn't hold much fore wood, but it's easy to get i dump it and stack later.

Keep the Peace :cop: :peace:
Harry
Attachments
IMG_2360.JPG
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Re: Wood cuttin starting soon.

Post by propane1 »

Loaders are sooo handy for doing wood. Did a bit of cutting today. Was a little hot for doing it, but it’s a start. Hoping to go and do some in the morning tomorrow. Be a little cooler then.

I hope Eugen wins over a million on the ticket he bought. :giggle: :giggle:


Noel :D
Attachments
E67CEC81-8172-4EEA-BCF0-C61EED9A0F46.jpeg
0BDB0D9D-4014-412B-B091-0C33136FF20F.jpeg
ACBD24A4-8DEC-46FE-B638-3BAAD147AC53.jpeg
User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16195 times
Contact:

Re: Wood cuttin starting soon.

Post by Eugen »

yeah, I'm going to steal your idea and store my mower deck on some old tires I have. :worship:
Case 224, 444, 644, 680E
Kubota B26 :blush:
JSinMO United States of America
Posts: 1526
Joined: Sat Apr 23, 2022 8:16 pm
Location: Missouri
Has thanked: 11930 times
Been thanked: 6578 times

Re: Wood cuttin starting soon.

Post by JSinMO »

Great idea on your extended exhaust stack! Your making me think I should go pull the old log splitter my dad made up to the shop and get it started. Can’t believe we’re getting to wood cutting time, seems like summer just started.
Post Reply