Paint Bomb shaker
- propane1
- Posts: 2445
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5805 times
- Been thanked: 8774 times
Re: Paint Bomb shaker
Now that you mention the fire extinguisher Gordy , I better do that.
Any way. Made one of those can stirrers. Took about two minutes. Hehe. If any of you like cold drinks, you should have one of these coolers around. A two inch long 3/8” bolt and a nut. Two large washers. Paint can fits in snug. Put every thing into a small drill and spin just above slow. Hold horizontal for a minute, then tip to 45 degrees, while spinning, then back the other way 45 degrees, should hear the ball going back and forth. Then do it in reverse. There all stirred up.
Boy that was quite a ramble.
Noel
Any way. Made one of those can stirrers. Took about two minutes. Hehe. If any of you like cold drinks, you should have one of these coolers around. A two inch long 3/8” bolt and a nut. Two large washers. Paint can fits in snug. Put every thing into a small drill and spin just above slow. Hold horizontal for a minute, then tip to 45 degrees, while spinning, then back the other way 45 degrees, should hear the ball going back and forth. Then do it in reverse. There all stirred up.
Boy that was quite a ramble.
Noel
- Eugen
- Posts: 5161
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12071 times
- Been thanked: 16312 times
- Contact:
Re: Paint Bomb shaker
Now that it's become a trend I'll have to make one too!
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- Harry
- Posts: 1510
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9362 times
- Been thanked: 6332 times
Re: Paint Bomb shaker
I have a bunch of old cozies around. I'll have to make one the next time I'm in the shop. Like, tomorrow!Propane57 wrote: ↑Tue Feb 22, 2022 3:16 pm Now that you mention the fire extinguisher Gordy , I better do that.
Any way. Made one of those can stirrers. Took about two minutes. Hehe. If any of you like cold drinks, you should have one of these coolers around. A two inch long 3/8” bolt and a nut. Two large washers. Paint can fits in snug. Put every thing into a small drill and spin just above slow. Hold horizontal for a minute, then tip to 45 degrees, while spinning, then back the other way 45 degrees, should hear the ball going back and forth. Then do it in reverse. There all stirred up.
Boy that was quite a ramble.
Noel
Keep the Peace
Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
- Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Paint Bomb shaker
The only thing that worries me about the cozies is that I have had the bottoms fall out just sliding a beer in and out
Gordy
Gordy
- DavidBarkey
- Posts: 3138
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17253 times
- Been thanked: 10584 times
Re: Paint Bomb shaker
Someone posted this in one of the Facebook forums I read. https://www.facebook.com/1208355165/vid ... 361936872/
Dave
Dave
Last edited by DavidBarkey on Sat Mar 12, 2022 6:40 am, edited 1 time in total.
Dave
Mad Tractor Builder
Mad Tractor Builder
- Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Paint Bomb shaker
That requires me to sign in or join FB. Any chance you could copy and paste here what you wanted us to see?DavidBarkey wrote: ↑Fri Mar 11, 2022 6:35 am Someone posted this in one of the Facebook forums I read.[url]https://www.facebook.com/1208355165/vid ... 36872//url]
Dave
Gordy
- Eugen
- Posts: 5161
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12071 times
- Been thanked: 16312 times
- Contact:
Re: Paint Bomb shaker
The link doesn't work even with a fb account.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3138
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17253 times
- Been thanked: 10584 times
Re: Paint Bomb shaker
Try it now . For some reason lately every time I try using the URL button thing get screwed up . Don't why .
Dave
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- Eugen
- Posts: 5161
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12071 times
- Been thanked: 16312 times
- Contact:
- DavidBarkey
- Posts: 3138
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17253 times
- Been thanked: 10584 times
Re: Paint Bomb shaker
Yet when I click on it , it works . Well as an old freind of mine all ways say in case like this . "Well that there is a problem to be solved , but it is way above my pay grade. "
I will try one more time .
https://www.facebook.com/1208355165/vid ... 361936872/
see if this works
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder