David, hood and cab pics of the 446. This tractor is the one I use for removing snow with the caster. Cab was purchased from someone who had it in his front yard at a great price. He had no idea what kind of tractor it was on and no makings on the cab. PO made 1/2" plywood doors with plexiglass windows. Glass in the windshield and plexiglass in the rear. manual windshield wiper in the front windshield. It usually takes me less than an hour to clean two driveways so no heater needed. Most of the time I hear sweat pants and a hoodie to use tractor in winter. Cab is great for keeping the wind of the driver.
Keep the Peace
Harry
Bigger rear fenders
-
Harry
- Posts: 1530
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9514 times
- Been thanked: 6449 times
Re: Bigger rear fenders
- Attachments
-
- Hood and cab up
-
- Gas tank access cab up
-
- cab up
-
- hood up cab down
-
- Hood and cab down
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Bigger rear fenders
Harry,
How is your cab supported when tipped back? Mine came with a kickstand.
Gordy
How is your cab supported when tipped back? Mine came with a kickstand.
Gordy
-
DavidBarkey
- Posts: 3166
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17394 times
- Been thanked: 10731 times
Re: Bigger rear fenders
Gordy do you need to flip back to get in ? I could not see a door.
Dave
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
-
Harry
- Posts: 1530
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9514 times
- Been thanked: 6449 times
Re: Bigger rear fenders
I attached two cables one on each side to support the cab when tilted back. When I get out in my shop, I'll take a pic.
Keep the Peace
Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
Gordy
- Posts: 653
- Joined: Sat Mar 06, 2021 1:24 pm
- Location: MapleLake,MN
- Has thanked: 2343 times
- Been thanked: 2136 times
Re: Bigger rear fenders
The cab has a door on the left side. Need to flip the cab back to open the hood and flip the seat pan up for access to the PTO / belt clutch and whatnot under the pan.DavidBarkey wrote: ↑Mon Nov 29, 2021 6:26 am Gordy do you need to flip back to get in ? I could not see a door.
Dave
Gordy
-
Harry
- Posts: 1530
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9514 times
- Been thanked: 6449 times
Re: Bigger rear fenders
Sorry for the delay on the pics. I attached a cable on both sides of the cab to the bracket I fabricated to hold the cab when tilted back.Gordy wrote: ↑Mon Nov 29, 2021 8:21 amThe cab has a door on the left side. Need to flip the cab back to open the hood and flip the seat pan up for access to the PTO / belt clutch and whatnot under the pan.DavidBarkey wrote: ↑Mon Nov 29, 2021 6:26 am Gordy do you need to flip back to get in ? I could not see a door.
Dave
SAM_0800.JPG
SAM_0804.JPG
SAM_0805.JPG
Gordy
Keep the Peace
Harry
- Attachments
-
- left side cable
-
- right side cable
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
-
DavidBarkey
- Posts: 3166
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17394 times
- Been thanked: 10731 times
Re: Bigger rear fenders
finally in paint .
couple of days to harden , then install on the chasey .
Dave
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
-
Doublet
- Posts: 145
- Joined: Sat Jan 15, 2022 1:02 pm
- Location: Gotebo Okla 73041
- Has thanked: 1090 times
- Been thanked: 520 times
Re: Bigger rear fenders
Very Nice job on the fenders!
One of the hardest things to do with some of the Cases is to get on and off.
Terry
One of the hardest things to do with some of the Cases is to get on and off.
Terry
"It is all about the history of the tractors. "One tractor at a time"