Done a thing

Tools, fabrication, measuring, storing...
User avatar
Harry United States of America
Posts: 1487
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9168 times
Been thanked: 6201 times

Re: Done a thing

Post by Harry »

With warmer weather coming and almost out of wood close to my shop, I decided to clean up the wood furnace and give it a coat of high heat header paint. First I gave the stove pipe a light sanding and then wire brushed the furnace down good. I could have used a third can of paint but two did a good job. After the paint dried I fired up the furnace and opened the two overhead doors to get a flow of air through the shop. That paint is nasty to breathe.

Keep the Peace
Harry
Attachments
IMG_1705.JPG
IMG_1706.JPG
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Re: Done a thing

Post by propane1 »

Ya nasty for sure. I’d do it a second time just to get it all gone. Looks good.
Never know when :wife: could come out and give you the :wife: hehe.

Sorry Harry. Your wife is probably one of the good ones.


Noel
User avatar
DavidBarkey Canada
Posts: 3108
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17080 times
Been thanked: 10414 times

Re: Done a thing

Post by DavidBarkey »

Propane57 wrote: Wed Mar 16, 2022 8:30 pm Ya nasty for sure. I’d do it a second time just to get it all gone. Looks good.
Never know when :wife: could come out and give you the :wife: hehe.

Sorry Harry. Your wife is probably one of the good ones.


Noel
:wife: There all good ones . Some are just not good for you . My first one was not good for me :fight: :dizzy: , but turned out to be good for someone else. Over 25 years with the second one , so been good for me .


Dave
Dave
Mad Tractor Builder
User avatar
Harry United States of America
Posts: 1487
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9168 times
Been thanked: 6201 times

Re: Done a thing

Post by Harry »

Propane57 wrote: Wed Mar 16, 2022 8:30 pm Ya nasty for sure. I’d do it a second time just to get it all gone. Looks good.
Never know when :wife: could come out and give you the :wife: hehe.

Sorry Harry. Your wife is probably one of the good ones.


Noel
They are all good some of the time and some are good all the time. But all are not good all of the time. We all have are own peculiarities.

Keep the Peace
Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
Harry United States of America
Posts: 1487
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9168 times
Been thanked: 6201 times

Re: Done a thing

Post by Harry »

Yesterday I switched my tractors around to get ready for spring work outside. I moved my 446-winter tractor into the lean-to and moved the 644 lbh into the shop. I'm done working on the 446 but the 644 lbh needs some attention. The loader bucket cylinder is leaking oil and needs a seal kit, which is on the shelf ready to be installed. I also need to look at the "banana" control plate for wear. It still works fine but there is a noticeable amount of play. I'll probably change the oils while I'm at it and give it a good going over while it's in the shop.

Keep the Peace
Harry
Attachments
IMG_1714.JPG
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
DavidBarkey Canada
Posts: 3108
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17080 times
Been thanked: 10414 times

Re: Done a thing

Post by DavidBarkey »

Found some new adapters for my hoist :cheers:
image.png
:thumbsup:

Dave
Dave
Mad Tractor Builder
User avatar
Eugen Canada
Posts: 5141
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11934 times
Been thanked: 16195 times
Contact:

Re: Done a thing

Post by Eugen »

Wow, I hope to see seats like that in your shop! That's genius! :cheers:
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
Harry United States of America
Posts: 1487
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9168 times
Been thanked: 6201 times

Re: Done a thing

Post by Harry »

Once I was having a few of my friends over to enjoy some sausage on the grill and share some libations. I lifted my Snapon scissor lift up to a comfortable height and put a 4X8 sheet of plywood on it for a table.

Keep the Peace :cop:
Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
DavidBarkey Canada
Posts: 3108
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17080 times
Been thanked: 10414 times

Re: Done a thing

Post by DavidBarkey »

Eugen wrote: Fri Apr 15, 2022 7:48 am Wow, I hope to see seats like that in your shop! That's genius! :cheers:
Just need to find some seats like that . I remember seeing new repop one some where .

Dave
Dave
Mad Tractor Builder
User avatar
propane1 Canada
Posts: 2427
Joined: Thu Dec 23, 2021 11:32 am
Location: PEI, Canada
Has thanked: 5740 times
Been thanked: 8671 times

Re: Done a thing

Post by propane1 »

I think Princess auto had those seats.


Noel
Post Reply