Done a thing
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
Re: Done a thing
@Eugen If you could bring what ever you have that like that when you come up next . Here is a pic. of the motor plate .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12091 times
- Been thanked: 16346 times
- Contact:
Re: Done a thing
Sure. Can you show what's in the control box?
A beefy motor like that probably has an electromechanical contactor relay in the box.
Basically I want to know if it already uses one of these guys or should I look for one
Microswitches I don't have but they're cheap on digikey.
Normally I would put at least two microswitches in series with the coil of the contactor relay.
A beefy motor like that probably has an electromechanical contactor relay in the box.
Basically I want to know if it already uses one of these guys or should I look for one
Microswitches I don't have but they're cheap on digikey.
Normally I would put at least two microswitches in series with the coil of the contactor relay.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
Re: Done a thing
Just 1 15A 230vac push button .Eugen wrote: ↑Tue Feb 15, 2022 8:50 am Sure. Can you show what's in the control box?
A beefy motor like that probably has an electromechanical contactor relay in the box.
Basically I want to know if it already uses one of these guys or should I look for one
952DFFCC-8FED-4988-93CA-1A63ED98A3BC.jpeg
Microswitches I don't have but they're cheap on digikey.
Normally I would put at least two microswitches in series with the coil of the contactor relay.
Agreed one micro switch over each tower and one on the stop bar to go with the go button .
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12091 times
- Been thanked: 16346 times
- Contact:
Re: Done a thing
Sorry Dave, looks like you were not lucky this time. The one I got is 10A
You can still have it if you want it.
You can still have it if you want it.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- Eugen
- Posts: 5166
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12091 times
- Been thanked: 16346 times
- Contact:
Re: Done a thing
I would feel much better with something like this in that position.
https://www.ebay.ca/itm/ALLEN-BRADLEY-C ... 632-2357-0
https://www.ebay.ca/itm/ALLEN-BRADLEY-C ... 632-2357-0
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
Re: Done a thing
I will wait until you are up next and you can have a quick look at it and the manual that has all the spec.s . You know this stuff better than . I know I need safeties to be there and can wire them but have troubles knowing exactly what to get .Eugen wrote: ↑Tue Feb 15, 2022 1:43 pm I would feel much better with something like this in that position.
https://www.ebay.ca/itm/ALLEN-BRADLEY-C ... 632-2357-0
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
- DavidBarkey
- Posts: 3146
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17290 times
- Been thanked: 10636 times
Re: Done a thing
Have the 2 for front wheels made , working on the 2 for the rear wheels . Hope to have them done this weekend . Biggest thing I am fighting is fumes. I have a mask , a filter fan and an exhaust fan . But still have to take breaks to let the air clear . Only 24 x 32 shop . Can't tolerate cold any more so can't open the doors for long . I like many will be glad to see warmer weather . As soon as the 1"x 4" bolts arrive I can upload pics. of the 446 on the lift . Doing laundry right now because the is complaining about the smell of my work clothes in the hamper . Oh well happy wife happy life they say .
Dave
Dave
Dave
Mad Tractor Builder
Mad Tractor Builder
- Harry
- Posts: 1513
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 9403 times
- Been thanked: 6354 times
Re: Done a thing
Dave I'm confused. Fumes from the milling?DavidBarkey wrote: ↑Wed Mar 02, 2022 5:06 pm Have the 2 for front wheels made , working on the 2 for the rear wheels . Hope to have them done this weekend . Biggest thing I am fighting is fumes. I have a mask , a filter fan and an exhaust fan . But still have to take breaks to let the air clear . Only 24 x 32 shop . Can't tolerate cold any more so can't open the doors for long . I like many will be glad to see warmer weather . As soon as the 1"x 4" bolts arrive I can upload pics. of the 446 on the lift . Doing laundry right now because the is complaining about the smell of my work clothes in the hamper . Oh well happy wife happy life they say .
Dave
Keep the Peace
Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226