Got screaming deal ,I could not pass up . Been wanting bigger lathe for some time now . The Atlas 6-18 is just too small but gave me something . The new one is a Craftex 10-18 ( Chinese ) . Not the Standard Modern I was hoping for but it was only used twice to turn some wood pens and is a lot bigger than the Atlas . Come with cabinet stand and some tooling that would have cost me over $3600 to buy new , I got it for $1700. Now I have something that I can do more with and maybe make enough extra $ to buy a Standard Modern in the future .
It has been a good weekend . I will upload some pics. when I get every thing set up. If a neighbour does not take the Atlas then it will be up for sale . I have used it to reface valves , make pins , bushings and sleeves ect.
Dave
New lathe
- DavidBarkey
- Posts: 3151
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17322 times
- Been thanked: 10660 times
- Eugen
- Posts: 5167
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12108 times
- Been thanked: 16355 times
- Contact:
Re: New lathe
That's a serious lathe! I have a busy bee branded drill press and it's very heavy duty. I think you'll really like that lathe with all those modern features. To change the pitch of threads I want to make on my Myford 7 I need to put different gears and such, so I never do it
Congrats on your new lathe Dave!
Congrats on your new lathe Dave!
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
- DavidBarkey
- Posts: 3151
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 17322 times
- Been thanked: 10660 times
- thebuildist
- Posts: 818
- Joined: Mon Jul 26, 2021 5:09 pm
- Location: Atlanta, ga
- Has thanked: 839 times
- Been thanked: 3270 times
Re: New lathe
Very nice looking, and congrats! You'll find this larger size and addtional features really handy, I'm sure.
I've long since moved on from my Atlas 6" lathe, but it's what got me started, and I'll always have happy memories of it.
Bob
I've long since moved on from my Atlas 6" lathe, but it's what got me started, and I'll always have happy memories of it.
Bob
"Never be afraid to try something new. How hard can it be?"
-
- Posts: 78
- Joined: Sun Mar 07, 2021 11:51 am
- Location: Nova Scotia, Canada
- Has thanked: 10 times
- Been thanked: 110 times
Re: New lathe
Nice lathe, I’ve seen the Craftex lathes at Busy Bee Tools they don’t look all that bad. I have a 11x20 Logan I think that size or near it would be about as small as I’d want to have. There is plenty of times I wish I had something a little bigger with a bit more umph.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Case 444 Golden Demo
Ingersoll 7020
Massey Ferguson 320GTX (Ingersoll 4020PS)
Ingersoll 7020
Massey Ferguson 320GTX (Ingersoll 4020PS)