Tools we all need.

Tools, fabrication, measuring, storing...
User avatar
Harry United States of America
Posts: 1483
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9141 times
Been thanked: 6196 times

Re: Tools we all need.

Post by Harry »

Bob actually I picked the centerpunch up at a garage sale for $20! :peace: Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
User avatar
DavidBarkey Canada
Posts: 3106
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17059 times
Been thanked: 10405 times

Re: Tools we all need.

Post by DavidBarkey »

Harry wrote: Wed Mar 01, 2023 7:50 am Bob actually I picked the centerpunch up at a garage sale for $20! :peace: Harry
The fact you picked up anything Starrett for under $100 is amasing in its self . High quality and the $$ to go with it .
Dave
Mad Tractor Builder
User avatar
Harry United States of America
Posts: 1483
Joined: Sun Mar 07, 2021 8:33 am
Location: Lockport,NY
Has thanked: 9141 times
Been thanked: 6196 times

Re: Tools we all need.

Post by Harry »

David, garage sale at a ladies house of a co workers house who passed away. She was selling all of his tools and didn’t know anything about tools. :peace: Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
ras101 United States of America
Posts: 589
Joined: Wed Apr 13, 2022 3:18 pm
Location: Webster, NY
Has thanked: 1099 times
Been thanked: 2546 times

Re: Tools we all need.

Post by ras101 »

Guys, this is never a question you should ask an avid tools collector. ALL tools are needed, I mean always! no exceptions! So honey want to go shopping with me? the answer always no - I hate shopping..
But when I go tools shopping - Honey just going to the tool store be back in a minute - yeah right...she knows I might be home that day but don't expect me...
User avatar
thebuildist United States of America
Posts: 812
Joined: Mon Jul 26, 2021 5:09 pm
Location: Atlanta, ga
Has thanked: 836 times
Been thanked: 3231 times

Re: Tools we all need.

Post by thebuildist »

Harry wrote: Wed Mar 01, 2023 7:50 am Bob actually I picked the centerpunch up at a garage sale for $20! :peace: Harry
You Lucky Dog!

Bob
"Never be afraid to try something new. How hard can it be?"
ras101 United States of America
Posts: 589
Joined: Wed Apr 13, 2022 3:18 pm
Location: Webster, NY
Has thanked: 1099 times
Been thanked: 2546 times

Re: Tools we all need.

Post by ras101 »

So guys I really want you drawling here....my father was a design engineer in England! when ha past in 1987 I inherited all his drawing tools, design tools, etc. So I have everything Starrent! not only that but I picked up his brain too... he taught me soo much and that coupled with a attending a Technical Modern school in the UK where we learnt Technical drawing (yeah using a drawing board first before computers) scaling British Locomotives to 1/20th scale and then building these in the metal fab shop too. still ll his design tools, including his mics, etc and have augmented those over the years with digital instruments. I mean, mics, calipers, angle gauges, measures etc. I still , I guess old school in that I design first before building second and visualize everything first.
keith Canada
Posts: 117
Joined: Wed Nov 02, 2022 9:50 am
Location: Northern Ontario Canada
Has thanked: 1025 times
Been thanked: 613 times

Re: Tools we all need.

Post by keith »

This is one of my favorites.
DSCF0697.JPG
12"extension that I can use in my cordless impact or drill using magnetic bits for screws or with an adapter for 1/4"drive sockets. Available in different lengths.
User avatar
Toolslinger United States of America
Posts: 298
Joined: Wed Mar 03, 2021 12:03 pm
Location: NJ/PA
Has thanked: 23 times
Been thanked: 1435 times

Re: Tools we all need.

Post by Toolslinger »

I didn't have much Starrett stuff when I was young. This was during my woodworking phase, so really it just wasn't needed. I'd get the odd piece here and there at an auction. However I did specifically buy their 12" satin chrome combination square. There simply is no comparison to the generic plastic body, or aluminum body combo squares with the polished blades. Far beyond the smooth workings, and great accuracy (far more than I needed), was that you could actually read the rule without having to get the light just right, and they didn't rust up.
I've got 4 of those now, plus a couple 6" units, and then I splurged for a 24" bar as well. They were all pricey, but I'd do it again in an instant.

I've got other top quality units from Lufkin, and B&S, but being vintage, they don't have that satin chrome blade. They get used for sure, particularly when I want to have several squares set to different depths, but they sure aren't as easy as those Starretts.
User avatar
Eugen Canada
Posts: 5139
Joined: Wed Mar 03, 2021 2:52 pm
Location: Port Mcnicoll, Ontario
Has thanked: 11932 times
Been thanked: 16180 times
Contact:

Re: Tools we all need.

Post by Eugen »

Here's the caliper is like most from the few I got. It's easy to read, fairly accurate, and most importantly it can switch seemlessly between mm, in, and inch fractions.

58383732-C282-4D5E-A3F8-866634753444.jpeg


When I measured all the o-rings and seals of the 644 cylinders the fractions function was a great help because, assuming the seals and o-rings were standard sizes I was able to quickly zero in to the nominal fraction.

The accuracy as compares to my micrometer is consistently off 50 ten thousands. That's good enough for me. When I want more accuracy I get the micrometer out.

Supposedly it is spill proof. I would not dare test that though.

I got it from amazon about two years ago, brand moock.
Case 224, 444, 644, 680E
Kubota B26 :blush:
User avatar
DavidBarkey Canada
Posts: 3106
Joined: Sat Mar 06, 2021 10:35 am
Location: Waverley On.
Has thanked: 17059 times
Been thanked: 10405 times

Re: Tools we all need.

Post by DavidBarkey »

Eugen wrote: Sat Mar 04, 2023 12:17 am Here's the caliper is like most from the few I got. It's easy to read, fairly accurate, and most importantly it can switch seemlessly between mm, in, and inch fractions.


58383732-C282-4D5E-A3F8-866634753444.jpeg



When I measured all the o-rings and seals of the 644 cylinders the fractions function was a great help because, assuming the seals and o-rings were standard sizes I was able to quickly zero in to the nominal fraction.

The accuracy as compares to my micrometer is consistently off 50 ten thousands. That's good enough for me. When I want more accuracy I get the micrometer out.

Supposedly it is spill proof. I would not dare test that though.

I got it from amazon about two years ago, brand moock.
I too have a couple of mics. and verniers along with telescoping gauges . The Digital vernier is my go to as well or i have to get the magnifying glass out to use the old school ones .
Dave
Mad Tractor Builder
Post Reply