A tool box with drawers that I bought about a year ago came with a current production, cheapo 4" vise, one of those like ou buy at Harbour Freight, and here in Canada at Princess Auto. About a month ago I tightened it and the main shaft just snapped. I'm not that strong, so looking closer, it amazed me how thin the shaft was, for this size vise. Today I decided to fix it. Beveled the edges of the shaft where it was broken, and welded it using the little flux core wire welder. This is the welder I put on for sale but didn't get sold yet. I am amazed how good a job this little welder can do. Though I did clean it up on the bench grinder. a little. Now I know not to use my giant force on this vise any more.
Pictures
Broken vise
- Eugen
- Posts: 5160
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12037 times
- Been thanked: 16301 times
- Contact:
- propane1
- Posts: 2440
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 5789 times
- Been thanked: 8746 times
- Eugen
- Posts: 5160
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12037 times
- Been thanked: 16301 times
- Contact:
Re: Broken vise
Dave gave me that advice as well and I am very inclined to go this route. This little inverter welder is light and works on 120V but it has good penetration power for what it is. Much easier to lug it around and use it for small fixes. It retails for more than 500 but I got it for less than half on sale, which is probably it's real value.
Case 224, 444, 644, 680E
Kubota B26
Kubota B26
-
- Posts: 1554
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 12057 times
- Been thanked: 6735 times