Colt Case Ingersoll Garden Tractors

I do somewhere have an updated procedure for main fuel adjustment on the DD carbs, question is can I find it? The recommended way sometime after the service manual specs requires adjustment under load at a specified rpm. This might be right or wrong, but as I remember you set the throttle to say 300...

DavidBarkey wrote: ↑Thu Jan 11, 2024 5:53 pm , was off today . So she cooked . Had Marvin Lee Aday and rice for supper .

Had to look that up Dave, now I get it lol.......

Sounds like a good dinner for a cold day.

Bob

I just started installing my SB48 snow caster and noticed that there are two sets of holes on the idler arm /pully bracket on top of each other. Just wondering what the other set of holes are for. Mine are set on the top holes and I have a 21/32" x 82" belt that is very hard to put on. Lo...

The ultimate articulated Ingersoll GT with a powered dump cart. 6 WD! Built by Dan Haas of Rockford, IL.

The carburetor float on my Case 446 B43M Onan engine is made of a strange material. Some things I’ve seen mentioned in where ever you find information on these Carburetors is that most say to use a brass float. What is the difference between these two floats and why should you use a brass float. ? ...

So what I ran into with my new to me J serries caster is that the H & J casters 6.5" drive pulley use belt C23950 on 400 serries tractors. 81.625" belt length. The rest of the casters K-S and the SB's 6" drive pulley used on 400/4000 serries tractors use belt C23539. 80.5" b...

Ok... So the caster worked great, until it chewed up the belt... I put another that I had on hand from my previous 38" caster. I'm suspicious of it... It's in great shape, and it has possibly 1 hour on it if that. However the spring tensioner has almost no additional room to take up slack when...

So safe to say the only similarities as far as parts interchange to the 3000/4000 machines are the seat, battery and fuel tank cap? Sent from my SM-S906U using Tapatalk That would pretty well sum it up. The low end models used dual hydros with roller chain final drive, the heavier duty models used ...

Ingersoll bought out Grazer Inc. in order to add zero turn mowers to their line. Grazer had private labeled the same tractor to several other manufacturers. M & W gear ( a farm equipment short line company in Illinois) with red paint, Grazer painted gray and MTD. Parts for all brands are supplie...

I'll say 1973. Snap-fast attachment mount, isolation engine mounts & pto engagement lever facing the operator.

Bob