Colt Case Ingersoll Garden Tractors

@ the one on the left in the first pic is looking lean . I read somewhere that the Kohler and B&S twins have a lean bank and that the jet on one side is a half size larger and not to get them mixed up when redoing the 2 barrel carbs . Yes the 21HP and 23HP engines had 2 barrel carbs with two di...

@ the one on the left in the first pic is looking lean . I read somewhere that the Kohler and B&S twins have a lean bank and that the jet on one side is a half size larger and not to get them mixed up when redoing the 2 barrel carbs . Yes the 21HP and 23HP engines had 2 barrel carbs with two di...

Matt , did you ever check your float height ? If too low it will also cause to run lean . Have you checked compression ? Have you tried a different set of spark plugs ? I know they are long life but that doesn't mean they can't go bad . Spark plug colour . What does it say ? Maybe more than one thi...

Eugen wrote: ↑Mon May 06, 2024 12:09 pmCannot work on it right now though, I have limited time for wrenching.

We understand... explains where you have been for the past month or so too

I replaced the carb gasket this week and also shot some carb cleaner through the various holes in the carb while I had it apart. The pilot jet was nice and clean. Still lacks power. I tried adjusting the carb a bit. I left it a tad richer. Towards the end of the carb adjstment procedure, there is a ...

JSinMO wrote: ↑Sun May 05, 2024 9:09 pm Congratulations @MattA , glad you got it!
I’m looking forward to seeing it get mounted on your tractor and going to work!

This is basically what it does. Not my video...

Sorry to see the paint job ruined. This is what I used to paint my deck 7 years ago. Looked great but the paints been flaking down to the metal for years especially when I wash the deck with the hose set to stream. Maybe the rustoleum primer is also crap? I wiped the deck down with isopropyl alcohol...

Bought it :thumbsup: At some point I'll start work on a mount to the mule drive. Both linear actuators work. The bucket dump actuator has a clutch when it hits the end of its range. The lift probably does but I can't test that without the actuator mounted on both ends. The bucket is actually small e...

IMO you can do a lot better for $200.

Congrads Eugen