Colt Case Ingersoll Garden Tractors

Matt , what kind and brand of fuel are you using ? It's got 87 octane in it right now. I had some 109 octane, ethanol free mixed in with the 87 plus some sta-bil fuel stabilizer over the winter. I've run several gallons through since the winter. I just picked up a fresh tank but have not run any th...

Hang in there Eugene. You will get the bugs worked out and get the lawn finished up. A tank of gas mowing is quite an accomplishment. Been there and done that

Matt , what kind and brand of fuel are you using ? It's got 87 octane in it right now. I had some 109 octane, ethanol free mixed in with the 87 plus some sta-bil fuel stabilizer over the winter. I've run several gallons through since the winter. I just picked up a fresh tank but have not run any th...

@ the one on the left in the first pic is looking lean . I read somewhere that the Kohler and B&S twins have a lean bank and that the jet on one side is a half size larger and not to get them mixed up when redoing the 2 barrel carbs . Yes the 21HP and 23HP engines had 2 barrel carbs with two di...

@ the one on the left in the first pic is looking lean . I read somewhere that the Kohler and B&S twins have a lean bank and that the jet on one side is a half size larger and not to get them mixed up when redoing the 2 barrel carbs . Yes the 21HP and 23HP engines had 2 barrel carbs with two di...

Matt , did you ever check your float height ? If too low it will also cause to run lean . Have you checked compression ? Have you tried a different set of spark plugs ? I know they are long life but that doesn't mean they can't go bad . Spark plug colour . What does it say ? Maybe more than one thi...

Eugen wrote: ↑Mon May 06, 2024 12:09 pmCannot work on it right now though, I have limited time for wrenching.

We understand... explains where you have been for the past month or so too

I replaced the carb gasket this week and also shot some carb cleaner through the various holes in the carb while I had it apart. The pilot jet was nice and clean. Still lacks power. I tried adjusting the carb a bit. I left it a tad richer. Towards the end of the carb adjstment procedure, there is a ...

JSinMO wrote: ↑Sun May 05, 2024 9:09 pm Congratulations @MattA , glad you got it!
I’m looking forward to seeing it get mounted on your tractor and going to work!

This is basically what it does. Not my video...

Sorry to see the paint job ruined. This is what I used to paint my deck 7 years ago. Looked great but the paints been flaking down to the metal for years especially when I wash the deck with the hose set to stream. Maybe the rustoleum primer is also crap? I wiped the deck down with isopropyl alcohol...