Search found 3137 matches

by DavidBarkey
Mon Apr 22, 2024 8:52 am
Forum: Vanguard
Topic: Vanguard 12.5HP/14HP/16HP/18HP carburetor cleaning
Replies: 19
Views: 31025
Canada

Re: Vanguard 12.5HP/14HP/16HP/18HP carburetor cleaning

Have you put a new kit into the carb and have you checked the intake and carb base gaskets? Are you removeing the jets to clean them and the passage ways ?image.png This picture shows the exploded diagram . David I removed the main jet and attempted to clean the main jet and every passage way I cou...
by DavidBarkey
Mon Apr 22, 2024 6:26 am
Forum: Vanguard
Topic: Vanguard 12.5HP/14HP/16HP/18HP carburetor cleaning
Replies: 19
Views: 31025
Canada

Re: Vanguard 12.5HP/14HP/16HP/18HP carburetor cleaning

Have you put a new kit into the carb and have you checked the intake and carb base gaskets? Are you removeing the jets to clean them and the passage ways ?
image.png
This picture shows the exploded diagram .
by DavidBarkey
Mon Apr 22, 2024 6:22 am
Forum: Everything Else
Topic: Anybody have experience with old Gensets?
Replies: 5
Views: 149
Canada

Re: Anybody have experience with old Gensets?

So far my only experiance with old generators is that alot of them are low hour engines but the genny part for one reason or anouther no longer works . Parts and poeple that know how to repair them are few and far between now a days . But Low hour blocks that can be retro fitted into our tractors . ...
by DavidBarkey
Sun Apr 21, 2024 8:23 pm
Forum: Case Colt Ingersoll Discussion
Topic: Painting hood on 444
Replies: 4
Views: 258
Canada

Re: Painting hood on 444

ouuuh shiny . :thumbsup:
by DavidBarkey
Sat Apr 20, 2024 6:48 pm
Forum: Everything Else
Topic: I got hurt. (Sorry if this is a little graphic)
Replies: 9
Views: 263
Canada

Re: I got hurt. (Sorry if this is a little graphic)

I’m still not sure how this could happen and I thought one of you guys might have some insight. So the 2N lost spark AGAIN! I pulled it into the shop with the 446 and was trying to figure out what the heck could be happening. I had the switch on and was checking voltage to the coil with my meter an...
by DavidBarkey
Sat Apr 20, 2024 6:33 pm
Forum: Restorations
Topic: A/C GT for Dad
Replies: 41
Views: 69693
Canada

Re: A/C GT for Dad

It’s looking great Mr Dave! Thank for taking all the pictures and showing us the progress! I’ve been looking forward to them! Thanks Guys . Even though it is not Case , all the things I learned working on them I have used in this restore . There are many more things I have learned in this restore I...
by DavidBarkey
Fri Apr 19, 2024 4:58 pm
Forum: Restorations
Topic: A/C GT for Dad
Replies: 41
Views: 69693
Canada

Re: A/C GT for Dad

20240418_161832.jpg
20240418_161841.jpg
20240418_161847.jpg
20240418_161901.jpg
by DavidBarkey
Wed Apr 17, 2024 5:46 pm
Forum: Everything Else
Topic: Did the 446 just dodge a bullet?
Replies: 8
Views: 420
Canada

Re: Did the 446 just dodge a bullet?

Drain the oil and look for "matalic " in the oil . If none , I would pull the deck belt and go over the clutch checking all the bearings . Hopefully it is a bad clutch bearing . There a three in there that need to spin freely when clutch is disengaged . Check the breather and make sure non...
by DavidBarkey
Wed Apr 17, 2024 6:41 am
Forum: Attachments, Implements, Accessories
Topic: RM48 deck belt routing improvement
Replies: 30
Views: 5919
Canada

Re: RM48 deck belt routing improvement

That will make a major improvement . Well done . Weather keep up and you will be able test it out soon.
by DavidBarkey
Mon Apr 15, 2024 5:43 pm
Forum: Everything Else
Topic: On the funny side of the street
Replies: 387
Views: 399957
Canada

Re: On the funny side of the street

I know back years ago there were one are loaders for some farm tractors . But I never understood the point , two arms are twice as good .