Search found 67 matches
- Mon Feb 28, 2022 10:32 am
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
I think what I'm going to do for the time being is double check the compression with a gauge and then reinstall the original condenser. I did notice when I removed it that its connection to the point was a little loose. If that gets my spark back then I'll replace the plugs and see what that gets. B...
- Mon Feb 28, 2022 8:52 am
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
That's very true.
- Mon Feb 28, 2022 8:10 am
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
I really appreciate everyone's support. I know I have compression. I know had spark. If I put everything back together and it's just that new plugs were needed I'm going to feel pretty dumb.
- Sun Feb 27, 2022 9:46 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
It’s getting to be enough that I’m about ready to quit
- Sun Feb 27, 2022 8:24 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
I’m going to check everything again. Is it possible the test condenser I got (it’s for a car) is so wrong it just plain won’t work?
- Sun Feb 27, 2022 7:55 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
Condenser was grounded. Not much way to see if things are working correctly. Tried turning it by hand to see if I could but not much luck
- Sun Feb 27, 2022 5:20 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
Managed to get a nut and put it all back together. No spark at all now. Maybe the plunger isn’t working right after I removed the points case. Is there a right or wrong way to reinstall it?
- Sun Feb 27, 2022 1:00 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
Well, I got the points out, cleaned and filed them (only very minor putting). Cleaned the box. Hooked up a new test condenser. And then…. When I was going to reattach the points I dropped the nut. I don’t know if it went on the ground or down into the frame of the tractor but it’s gone and didn’t ha...
- Sat Feb 26, 2022 5:46 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
I plan to do all that tomorrow. The points are very hard to get to will require some dissembley. From what I could see there was a lot of oily crud in the points box though
- Sat Feb 26, 2022 3:16 pm
- Forum: Shop Talk
- Topic: Correct Piston..Finally!
- Replies: 86
- Views: 35328
Re: Correct Piston..Finally!
Yep. Same result. I’ll just buy new plugs and try it.