Colt Case Ingersoll Garden Tractors

"Also, as Harry has said extending the cab forward impacts being able to open the hood and would require the depth of the windshield to be reduced to allow opening, etc." Ray and others, here is how I extended the front "legs" of the cab and can still open the hood. Bob Front Hin...

They are for the panels for the HydraVac cart conversion :

Try this: https://www.caseingersollparts.com/apps ... ?q=131-629
Bob

Ray, if you are looking for drift cutters like in my photo, I got these Ariens Drift Cutters from Amazon several years ago. They had several models depending on what length and hole spacing you may need.
Bob

Matt, I did the same thing the same way (cardboard template) you did a few years ago, only I added 2 extra teeth on each side. I really like the extra rearward discharge, especially when I get to the end of the driveway.
Bob

I don't have any drawings or dimensions...I just made cardboard templates that I could bend for fit...it took a few pieces of cardboard. I no longer have them.
Here are a few more close up pics.
Bob

So here's the challenge guys _ I need to know how the housing extension in the caster frame (center) works and the dimensions? Is this really a useful accessory that solves a problem and everyone should have or not?. Is this what you are referring to - I'll call it an Auger Deflector? If so, then y...

On my 446, I use this Kidde Detector mounted on a piece of Lexan as a bracket. It slides on/off for battery replacement and storage.
I consider it necessary for 4xx tractors that blow hot air into the cab!
Bob

Here is a guide I made while looking for motors. Lock to Lock (Left to Right) on my snowcaster crank took 14 revolutions.

Dave, Cab looks great! Nicely done. Lots of visibility.
Bob