Hello All My name is Russ and my handle is Grayelve. Living in the snow belt at the Eastern end of Lake Erie (Hamburg, NY) which keeps me and my little bear 224 pushing a 38" caster pretty busy this time of year. Was following a 448 in my area which lead me here, still looking for the right one.
Retired in 2002 as an electronic tech who got terminal cancer but decided to hang around. Spent a couple few years after that trekking nature's wilderness then the second round in 2012 grounded me when they took a lung. Moving a little slower now days. I've contracted a fair amount of carpentry, concrete, electrical and fabrication workover the years. Spent several years moon lighting in an engine machine shop having weekends at the nearby circle track up till retiring and my buddy's young wife dumped him and blew in the shop's existence. I am always getting into something and it's my nature to tinker and make things and make them work for some reason or another. Ask an old fart like me something and You gotta know I will start running at the mouth but you never know it just might be worth listening to. So, looks like a bunch of good Casers here and this is me.
Glad to have found this Case Board
-
- Posts: 5280
- Joined: Wed Mar 03, 2021 2:52 pm
- Location: Port Mcnicoll, Ontario
- Has thanked: 12888 times
- Been thanked: 16930 times
- Contact:
Re: Glad to have found this Case Board
Russ, I appreciate you telling us a little about yourself, I think you're in good company here. Before anything else I pray to God that the nasty illness leaves you alone. Sounds like you have a lot of experience tinkering. Think of this place like a shop where we hang around with a beer or whatever else anyone drinks in hand while one guy's full of grease wrenching on his tractor! We're all happy to throw in all kinds of ideas while that poor guy entertains everyone with his repair adventures. While it may not be an entirely accurate account, we do like keeping things light and try to crack a smile. Big welcome again, and let's
- RoamingGnome
- Posts: 758
- Joined: Sun Jan 08, 2023 12:54 am
- Location: Hamilton, ON
- Has thanked: 10488 times
- Been thanked: 3829 times
Re: Glad to have found this Case Board
Howdy Russ!
Welcome aboard, there is always room for one more person around the work bench in our virtual garage. @Eugen description is pretty accurate, always lots of friendly helpful advice to be found here.
Take Care, looking forward to hearing more from you!
Gerry
Welcome aboard, there is always room for one more person around the work bench in our virtual garage. @Eugen description is pretty accurate, always lots of friendly helpful advice to be found here.
Take Care, looking forward to hearing more from you!
Gerry
'68 Case 195, '84 Case 446, '88 Ingersoll 222 - and 1965 Case 530ck (fullsize backhoe)
- Harry
- Posts: 1770
- Joined: Sun Mar 07, 2021 8:33 am
- Location: Lockport,NY
- Has thanked: 10808 times
- Been thanked: 7601 times
Re: Glad to have found this Case Board
Russ great to hear from you and your interesting life you’ve lived. Sorry to hear about your health situation. Sounds like you’re my kinds a guy with all the tinkering you’ve done over the years. With you living in Hamburg and myself in Lockport. We can get together and chat. Harry
1973 444, 1974 644, 1976 446, 1977 646, 1986 226
- DavidBarkey
- Posts: 3426
- Joined: Sat Mar 06, 2021 10:35 am
- Location: Waverley On.
- Has thanked: 18666 times
- Been thanked: 11974 times
Re: Glad to have found this Case Board
@Grayelve Russ welcome glad to have you onboard . Eugen pretty much summed it up .
Dave
Mad Tractor Builder
Mad Tractor Builder
- propane1
- Posts: 2611
- Joined: Thu Dec 23, 2021 11:32 am
- Location: PEI, Canada
- Has thanked: 6147 times
- Been thanked: 9656 times
Re: Glad to have found this Case Board
Hello Russ. Great to have you here. Great introduction. Jumpins that old cancer is nasty stuff.
Show us a few pictures of your tractor when ever you get time. We like seeing other peoples tractors and attachments. Take care.
Noel
Show us a few pictures of your tractor when ever you get time. We like seeing other peoples tractors and attachments. Take care.
Noel
-
- Posts: 1793
- Joined: Sat Apr 23, 2022 8:16 pm
- Location: Missouri
- Has thanked: 13562 times
- Been thanked: 7923 times
Re: Glad to have found this Case Board
@Grayelve Hello Russ, and welcome! Glad you made through that rough sickness. Like @Eugen said if you like to tinker you’ve come to the right place! I also seem to find myself tinkering with all sorts of junk, I mean rusty gold! Lucky these guys give me a lot of leeway!
Looking forward to seeing what your working on!
Looking forward to seeing what your working on!
- Timj
- Posts: 1449
- Joined: Thu Mar 04, 2021 9:57 pm
- Location: Central WI
- Has thanked: 5280 times
- Been thanked: 5063 times
Re: Glad to have found this Case Board
Welcome to CCIGT Russ it's good to have you here. hope you enjoy your time here and join in. The 448 is a great tractor, keep looking, the right one for you will come along.
Tim
Tim
deck's on, blades sharp, let's go it's time to mow
-
- Posts: 73
- Joined: Tue Sep 19, 2023 9:16 pm
- Location: Andover CT
- Has thanked: 165 times
- Been thanked: 445 times
Re: Glad to have found this Case Board
Welcome from caseingersolltractors.com we are in CT so nice to see other fellow North Easterners here! Great tight and friendly group here you should enjoy it for sure! Thanks for the intro always nice to know a little about everyone you are talking and dealing with makes it more personal and real lol. Enjoy!